Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

4. Radios Settings

3x3 AC series products have both a high capacity 2.4 GHz (3x3:3

802.11b/g/n) radio and a 5 GHz (3x3:3 802.11a/n/ac) radio. It can play

as different role in your network. This chapter shows the typical

deployment scenarios and configuration procedures.

4.1. Access Point Mode

Access Point (AP) allows wireless devices to connect to a wired

network using 802.11 a/b/g/n/ac standards. Wireless clients connect

the AP to join the network, such as laptops, smart phones etc.

Radio0 – 2.4G

Step 1: Configure General Wireless Setting

Figure 16 – 2.4G Radio General Setting

1. Go to Configuration > Wireless > Radio0 (2.4G) > General

2. Select Enable Radio checkbox to enable radio interface

3. Select AP on Radio Mode