Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Figure 13 – IPv6 WAN Setting

3. Go to Configuration > Network > General > WAN Setting (IPv6)

4. Select Static on Internet Connection Type

5. Enter valid IP Address on IPv6 Address

6. Enter valid IP subnet mask on IPv6 Subnet Mask

7. Enter valid IP address of default gateway on IPv6 Default Gateway

8. Enter valid IP address of DNS server on IPv6 DNS Server Address

Note:

- Click for adding more IPv6 Address and IPv6 DNS Server;

- Click to remove existing IPv6 Address and IPv6 DNS Server

entry

9. Click Submit

Assign IPv6 IP Address from DHCP server

Figure 14 – Enable IPv6 option

1. Go to Configuration > Network > General > Network Setting

2. Click Enable IPv6 checkbox

Figure 15 – IPv6 WAN Setting

3. Go to Configuration > Network > General > WAN Setting (IPv6)

4. Select DHCP on Internet Connection Type

5. Click Submit