Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

5. Enter valid IP address of default gateway on IPv4 Default Gateway

6. Enter valid IP address of DNS server on IPv4 DNS Server Address

Note:

- Click for adding more DNS;

- Click to remove existing DNS server entry

7. Click Submit

Assign IPv4 IP Address from DHCP server

Figure 11 – IPv4 WAN Setting (DHCP Client)

1. Go to Configuration > Network > General > WAN Settings (IPv4)

2. Select DHCP on Internet Connection Type

3. Click Enable DHCP Option 60 checkbox to specify vendor class

identifier. This entry is optional.

4. Enter a string between 1 and 32 characters long on DHCP Option 60.

This entry is optional.

5. Click Submit

Assign Static IPv6 IP Address

Figure 12 – Enable IPv6 option

1. Go to Configuration > Network > General > Network Setting

2. Click Enable IPv6 checkbox