Configuration Manual

9
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
Secondary IP Address of AP
The default IP address of access points is 192.168.1.222/24. AP support a
fixed IP address on the Ethernet connection called Secondary IP
Address. This secondary IP address is 192.168.99.x/24 where x denotes
as the decimal value of the last byte of the Ethernet MAC address on
the access point.
Example 1:
Device Ethernet MAC address: 00:19:BE:20:03:8C
Secondary IP Address of this device:
192.168.99.140 (8C (HEX)  140 (DEC))
The secondary IP address uses IP range from 192.168.99.5/24 to
192.168.99.254/24. The rest of IP addresses are reserved. If the last byte
of a MAC address matches any of the reserved IP addresses, the
supported device shall follow the MAC to IP address mapping shown in
Table :
Table 4 - Product Secondary IP Address
Ethernet MAC
address
Reserved Purpose
Replaced MAC
byte
Secondary IP
address
XX:XX:XX:XX:XX:00
Invalid IP
A0
192.168.99.160
XX:XX:XX:XX:XX:01
For gateway
A1
192.168.99.161
XX:XX:XX:XX:XX:02
For operator
computer
A2
192.168.99.162
XX:XX:XX:XX:XX:03
For operator
computer
A3
192.168.99.163
XX:XX:XX:XX:XX:04
For operator
computer
A4
192.168.99.164
XX:XX:XX:XX:XX:FF
Invalid IP
AF
192.168.99.175
Example 2
Device Ethernet MAC address: 00:19:BE:20:03:FF
Secondary IP Address of this device:
192.168.99.175 (FF (HEX)  AF (HEX)  175 (DEC))