Configuration Manual

143

Dual-band 3x3 802.11 ac WiFi Access Point

IPv4 DNS Server - indicate a node that provides DNS service for the

device

LAN Interface

IP Address - Current IP address of device on LAN

Subnet Mask – indicate the subnetwork device belongs to

NAT – indicate whether device performs network address translation

(NAT) or not

DHCP Server - indicate whether built-in DHCP server is enabled or not

Interfaces

Interfaces provide the real time status of all interfaces on the AP device.

Figure 153 – Interfaces

Ethernet (eth0) / Ethernet (eth1)

MAC – MAC address of Ethernet 0/1 interface

Link – indicate the status and operating mode of Ethernet 0/1

Transmit – indicate the traffic and instant throughput of transmission on

Ethernet 0/1

Receive – indicate the traffic and instant throughput of receive

operation on Ethernet 0 /1

Radio0 (2.4G) / Radio1 (5G)

MAC – MAC address of Radio 0 interface

Channel – indicate operating frequency (channel) of Radio 0/1

Wireless Mode – indicate 802.11 standards that Radio 0/1 operates

Noise Level – indicate the noise level in terms of dBm of operating

channel

Transmission Power – indicate the total transmission power of Radio 0/1