Configuration Manual

134

Dual-band 3x3 802.11 ac WiFi Access Point

14.2. Firmware Update

Network administrator updates (upgrades or downgrades) AP device’s

firmware via web UI.

Figure 142 – Firmware Update

1. Go to Administration > Firmware Update

2. Click Browse, then select suitable firmware image file (.bin)

3. Select the suitable options under the Browse button; options include

Keep all settings - Device keeps all operating setting after updating

firmware

Keep Network Address settings only - Device keeps IP address, subnet

mask only after updating firmware; the other settings will be restored as

default settings

Full Factory Reset - Device restores all setting as default settings after

updating firmware

4. Click Upload Image

5. If uploaded firmware image is valid, click Proceed to continue;

otherwise, error message will be shown

6. Wait unit AP completes updating firmware

7. Login with correct username and password, then check the

firmware version on About > Product Version

Caution:

- Do not interrupt the process of firmware update. Please

maintain network connection and power supply during

updating firmware; otherwise AP may not function.