Configuration Manual

6
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
Step 2: Connecting Access Point
1. Connect your laptop to Data/IN port on the PoE Injector provided in
the product’s package using Ethernet cable
2. Connect the Ethernet port of AP to P+D/Out port on the PoE Injector
provided in the product‘s package using Ethernet cable.
3. Connect the power cord to the power port on the PoE Injector.
Connect the other end of the power cord to a power outlet.
Figure 7 – AP 2458 Connection Diagram
4. Verify the AP’s Power LED is steady orange (Thick AP) or steady
green (Thin AP) after a minute