Configuration Manual

125
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
Step 1: Configure as Gateway Mode
Refer to IP Gateway on page 121 for more detail
Figure 133 – Port Forward List
Step 2: Configure Port Forwarding
Figure 134 – Port Forward Setting
1. Go to Configuration > Network > Port Forward
2. Click on any ID
3. Click Enable checkbox to enable port forward profile
4. Enter the host’s IP address on Local IP Address that provides service
to hosts on WAN interface(s)
5. Enter the service listening port of the host on Local Port that provides
service to hosts on WAN interface(s)
6. Select suitable protocol(s) on Protocol Type. Options include
TCP & UDP
TCP
UDP
7. Enter the listening port at WAN side on Global Port
8. Enter any description on Description about this port forward profile.
This entry is optional.
9. Click Submit