Configuration Manual

123

Dual-band 3x3 802.11 ac WiFi Access Point

Step 8: Apply Submitted Configurations on the AP

Device

1. Click Save & Apply from the top on the right.

11.2. DHCP Server

AP series products have built-in DHCP server; it can dynamically

distribute network configuration parameters to the connected end

devices on all LAN interfaces.

Note:

- DHCP Server is applicable on Gateway mode ONLY

Step 1: Configure as Gateway Mode

Refer to IP Gateway on page 121 for more detail

Step 2: Enable DHCP Server

Figure 131 – DHCP Server Setting

1. Go to Configuration > Network > DHCP

2. Select Server Mode on DHCP Server

3. Click Submit