Configuration Manual

122
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
2. Enter valid IP Address on LAN IP Address; 192.168.98.1 is the default
setting
3. Enter valid IP subnet mask on LAN IP Subnet Mask; 255.255.255.0 is
default setting
4. Click Submit
Figure 129 – WAN/LAN Interface Assignment
Step 5: Assign Interface(s) as WAN Interface
Figure 130 – WAN Interface Assignment
1. Go to Configuration > Network > WAN/LAN Interface Assignment
2. Click at the end of WAN row
3. Select appropriate interface(s) on WAN Interfaces list that acts as
WAN interface.
4. Click Submit
Step 6: Assign Interface(s) as LAN Interface
1. Go to Configuration > Network > WAN/LAN Interface Assignment
2. Click at the end of LAN row
3. Select appropriate interface(s) on LAN Interfaces list that acts as
WAN interface.
4. Click Submit
Step 7: NAT Setting
1. Go to Configuration > Network > WAN/LAN Interface Assignment
2. Click Enable NAT Mode checkbox if NAT is required. This entry is
optional
3. Click Submit