Configuration Manual

121

Dual-band 3x3 802.11 ac WiFi Access Point

11. IP Gateway

To provide the flexibility on network deployment, AP device can act as

IP gateway on the network. IP Gateway is a network element that

connects to two or more IP network physically, no matter via wire

medium or wireless medium.

Note:

- Interfaces under the same group work as switch interfaces.

E.g. Ethernet 0 and WLAN 0 of Radio 1 are assigned as WAN,

they forward packet between them based on MAC address.

11.1. IP Gateway

Step 1: Configure WAN IP Setting

Refer to Step 5: Assign an IP Address to AP Device on page 10 for more

detail

Step 2: Configure Radio Settings

Please refer to Radios Setting on Page 14 to complete the radio

settings

Step 3: Enable Gateway Mode

Figure 127 – Network Setting

1. Go to Configuration > Network > Network Setting

2. Select Gateway Mode on Network Setting

3. Click Submit

Step 4: Configure LAN IP Setting

Figure 128 – LAN Setting (IPv4)

1. Go to Configuration > Network > LAN Setting (IPv4)