Configuration Manual

120

Dual-band 3x3 802.11 ac WiFi Access Point

Except WMM settings on each AP’s radio interface, AP also provide

DSCP-to-WMM mapping on each individual SSID. Network administrator

specifies different DSCP value on the four WMM access categories;

they are Best Effort (BE), Background (BK), Video (VI), and Voice (VO).

Figure 126 – 2.4G WLAN # QoS

1. 2.4G Interface: Go to Configuration > Wireless > Radio0(2.4G) >

WLAN > WLAN # > QoS

5G Interface: Go to Configuration > Wireless > Radio1(5G) > WLAN >

WLAN # > QoS

2. Select Enable DSCP-to-WMM Mapping checkbox that AP provides

different QoS to the incoming packet with the corresponding DSCP

value

3. Enter DSCP value on Best Effort (BE), Background (BK), Video (VI),

and Voice (VO); these entry is optional

4. Click Submit

5. Click Save & Apply from the top on the right

Note:

- AP classify the packet without DSCP marking as Best Effort (BE)

traffic