Configuration Manual

115

Dual-band 3x3 802.11 ac WiFi Access Point

4. Select appropriate VLAN ID on PVID as default VLAN ID of the

interface

5. Click Default VLAN Tagging checkbox that AP tags all incoming

untagged packet with PVID before forwarding them. This entry is

optional

6. Click VLAN Pass Through checkbox that AP does not modify the

VLAN tag on incoming packets before forwarding them. This entry is

optional

7. Select appropriate VLAN ID(s) on the VLAN(s) list that interface

forwards the packet with selected VLAN ID(s). Unlike VLAN Pass

Trough, the interface only forwards the packets to selected VLAN.

8. Click Submit

Step 7: Apply Submitted VLAN Configurations

on the AP Device

1. Click Save & Apply from the top on the right.