Configuration Manual

112

Dual-band 3x3 802.11 ac WiFi Access Point

6. VLAN Configuration

VLAN is layer-2 network domain that may be partitioned to create

multiple distinct broadcast domains, which are mutually isolated so

that packets can only pass between them via one or more routers.

Note:

- VLAN is applicable on Switch mode ONLY

Step 1: Configure Radio Settings

Please refer to Radios Setting on Page 14 to complete the radio

settings

Step 2: Enable VLAN

Figure 118 – VLAN Setting

1. Go to Configuration > Network > VLAN

2. Click Enable VLAN checkbox to enable VLAN on AP device

3. Click Submit