Configuration Manual

107
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
5.5. Frame Aggregation
Frame aggregation allows the device to send multiple frames per
single access to the medium by combining frames together into one
larger frame.
Figure 110 – Frame Aggregation Configuration
1. 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >
Advanced > Advanced Settings
5G Radio: Go to Configuration > Wireless > Radio1(5G) > Advanced
> Advanced Settings
2. Click AMPDU checkbox to enable aggregation of MAC protocol
data unit (MPDU)
3. Enter the maximum number of data frame between 1 and 64 on
AMPDU Limit that AP pushes MPDUs into single PPDU; 64 is default
setting
4. Select AMSDU checkbox to enable aggregation of MAC service
data unit; AP pushes aggregated MSDU (MAC service data units)
into a single MPDU
5. Click Submit
6. Click Save & Apply from the top on the right.
5.6. Spatial Streaming
With multiple-input and multiple-output (MIMO) technique, AP can use
one or more individual stream for data transmission and reception. In
general, more available streams increase spatial efficiency.
Figure 111 – Spatial Streaming Configuration
1. 2.4G Interface: Go to Configuration > Wireless > Radio0 > Advanced
> Advanced Settings
5G Interface: Go to Configuration > Wireless > Radio1 > Advanced >
Advanced Settings
2. Select the maximum number of transmission between 1 and 3 on
Max Tx Streams
3. Select the maximum number of transmission between 1 and 3 on
Max Rx Streams
4. Click Submit
5. Click Save & Apply from the top on the right.