Configuration Manual

106
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
Figure 109 – Data Rate Setting
Configure Data Rate
1. 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >
Advanced > Data Rate Setting
5G Radio: Go to Configuration > Wireless > Radio1(5G) > Advanced
> Data Rate Setting
2. Select appropriate data rate on Data Rate; best is default setting.
This option lets AP device to determine the best data rate for
transferring data time by time. Otherwise, AP uses the selected data
rate for unicast packet transmission under any condition.
3. Click Submit
4. Click Save & Apply from the top on the right.
Configure Multicast Rate
1. 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >
Advanced > Data Rate Setting
5G Radio: Go to Configuration > Wireless > Radio1(5G) > Advanced
> Data Rate Setting
2. Select appropriate data rate on Multicast Rate; min is default setting.
This option lets AP device to use the minimum data rate for
transferring multicast packets. Otherwise, AP uses the selected data
rate for multicast packet transmission under any condition.
3. Click Submit
4. Click Save & Apply from the top on the right.