Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

2.1. Status

Figure 2 – Secondary tabs under Status tab

Status tab collects the information about AP’s system status, interfaces

status, and system logs. The following tabs can be found under status

tab:

Overview – display vital information on the device’s status. Information

includes system status, thin AP status, network status, and interfaces

status.

Radio0 (2.4G) – display 2.4G radio’s information including radio settings,

radio transmission and reception statistics, and connection information.

Radio1 (5G) – display 5G radio’s information including radio settings,

radio transmission and reception statistics, and connection information.

Ethernet - shows the current status of Ethernet interfaces. The

information includes Port, MAC Address, Auto-negotiation, Speed,

Duplex, Link Detected, instant throughput of uplink and downlink and

traffic of of uplink and downlink.

Logs - display log files for system information, association activity, and

alarm event.

2.2. Configuration

Figure 3 – Secondary tabs under Configuration tab

Configuration tab contains various configuration attributes about the

device. The following tabs can be found under configuration tab:

System – the configuration attributes about system information, logging,

Network Time Protocol (NTP), and web setting can be found in this tab.

Network – the configuration attributes about IP address, interface

assignment, VLAN, built-in DHCP server, port forward, and safe mode

can be found under this tab

Wireless – the configuration attributes about both 2.4G radio and 5G

radio can be found under this tab

Thin AP - the configuration attributes about thin AP mode can be found

under this tab