Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

6. Enter up to four keys in WEP Key 1, WEP Key 2, WEP Key 3 and WEP

Key 4 respectively. You can type either up to 5 ASCII characters or

up to 10 Hexadecimal characters as WEP Key.

7. Click Submit

Configure WLAN with WPA / WPA2 / WPA-auto Authentication

Figure 97 - 5G WLAN # Security Setting: WPA / WPA2 / WPA-auto Authentication

1. Go to Configuration > Wireless > Radio1(5G) > WLAN > WLAN # >

WLAN Security

2. Select WPA / WPA2 / WPA-auto on Authentication Mode

3. Select suitable encryption mode on Cipher Mode

If Authentication Mode is WPA:

TKIP + AES

This algorithm automatically selects TKIP or AES based on the

client’s capabilities

TKIP

This algorithm provides greater compatibility with older client

devices, but is not supported by the 802.11n standard.