Owner's Manual

i 12V
2V
3
(For GENPR01 OX1 /1 OX2/1 OX3/1 OX4, each bank is isolated and functions i ndependentfy .)
I
1.) Mode Button Push to cycle through charging Mooes .
2.) Overvoltage Error LED Illuminates solid Red ; Battery Voltage is above
Protect voltage.
3.) Bad Battery Error LED Illuminates solid Red when connected battery will
not hold a charge .
4.) Reverse Polarity &Tor LED Illuminates solid Red when reverse polarity
is detected .
5.) Standby LED Illuminates when the charger is in Standby Mode , the
charger is not charging or providing any power to the battery .
6.) Charge LED i ndicates the connected battery(s ) state-of-charge . .
7.) Mode LED Indicates the Charge Mode the charger is currentfy in. Push
the MODE button to ~ through charge Mooes .
8.) « Press and Hold» Mode LED Mode button must be pressed and held
foc 3 seconds to enter the mode .