READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, FIRE, which may result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE. Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not cut power cords. Do not submerge in water or get wet. Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product.
ln1portant Safety Warnings About Genius2D. The Genius2D is designed for charging the types of 12V lead-acid batteries, including Wet (Flooded), Gel, MF (Maintenance-Free) CA (Calcium), EFB (Enhanced Flooded Battery), and AGM (Absorption Glass Mat) batteries. It is suitable for charging battery capacities up to 40 Amp-hours and maintaining all battery sizes. Getting Started.
manufacturer prior to attempting to charge the battery. Do not charge pacemakers or other medical devices. Consult with your physician prior to use if you have any medical device including pacemakers. If you suspect the product is interfering with a medical device, stop using the product immediately and consult your physician. Medical Conditions.
On-Board Mounting. Mount the charger near the battery, ensuring the cables and charger are secure and away from any moving parts {eg. fan blades, belts, pulleys}. Secure the provided mounting bracket to the vehicle's chassis using the two included self-tapping screws. For best results, mark the position using the bracket, and pre-drill two small pilot holes. Once the bracket is secured, use the velcro strap to secure the Genius20 in place. Connecting to the Battery.
Understanding Charge LEDs. The charger has one (1) Charge LED. This Charge LED indicates the connected battery(s} state-of-charge (SOC}. See the explanation below: LED Explanation Pulsing Red LED The Red Charge LED will slowly pulse "on" and "off" when the battery is less than 75% fully charged. Solid Green LED When the battery is 100% charged, the Charge LED will be solid green.
Battery Size Approx. Time to Charge In Hours Ah 12V 8 2 12 3 24 6 40 10 Charging Times. The estimated time to charge a battery is shown below. The size of the battery (Ah) and its depth of discharge (DOD) greatly affect its charging time. The charge time is based on an average depth of discharge to a fully charged battery and is for reference purposes only. Actual data may differ due to battery conditions. The time to charge a normally discharged battery is based on a50% DOD.
NOCO warrants that this product (the "Product") will be free from defects in material and workmanship for a period of Three (3) years from the date of purchase (the "Warranty Period"). For defects reported during the Warranty Period, NOCO will, at its discretion, and subject to NOCO's technical support analysis, either repair or replace defective prooucts.
HASSLE-FREE WARRANTY CONDITIONS These conditions app!}' only to Product during the Warranty Period. The Hassle-Free Warran~ is void either by el~sed time from date of purchase (elapsed time from serial number date, if no proof of purchase) or from the conditions listed earlier in this document. Return Product with the appropriate documentation. With Receipt: 0-3 Years: NO Charge. With proof of purchase, The warranty period begins on date of purchase. With NO Receipt: 0-3 Years: NO Charge.
Wicked Smart.® NOCO® G2D.
GENIUS2D Lead Acid 12V 2A Auto | Marine | RV | Powersport | Lawn & Garden BATTERY CHARGER TM +MAINTAINER CHARGE FULLY DRAINED BATTERIES. ATVs, Lawn Mowers, Motorcycles, Cars, Trucks, Boats, RVs, Tractors, Equipment, And More. Introducing the GENIUS2D, one of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The GENIUS2D is a 2-amp direct-mount battery charger and battery maintainer engineered to be securely mounted near the battery.
WHAT'S IN THE BOX. Patented Technology Patented: visit no.co/patents Temperature LED 3/8" Eyelet Connectors Power LED Error LED User Guide Strain Relief 24" (25.4 mm) 18 AWG Cable 24" (25.4 mm) Mounting Strap Mounting Bracket Charge LED Self-tapping Screws Technical Specifications Input Voltage AC: Working Volatge AC: Power: Low-Voltage Detection: Back Current Drain: Ambient Temperature: Charger Type: Type of Batteries: Charging Times Battery Size Retail Packaging: Dimensions: 5.00”x2.30”x1.
