Warranty

Medical Conditions. If you have any medical condition
that you believe could be affected by product, including but
not limited to; seizures, blackouts, eyestrain or headaches,
consult your physician prior to use of product. The use of a
integrated high-powered flashlight contains a light sensitivity
hazard. Use of the light in Strobe Mode may cause seizures
in persons with photosensitive epilepsy, which may result in
serious injury or death.
Light. Staring directly into the light beam or shine of the
flashlight may result in permanent eye injury. The product is
equipped with a high output LED pre-focused lamp that emits
a powerful beam at the highest setting.
Cleaning. Power off the product before attempting any
maintenance or cleaning. Clean and dry product immediately
if it comes in contact with liquid or any type of contaminant.
Use a soft, lint-free (microfiber) cloth. Avoid getting moisture
in openings.
Explosive Atmospheres. Obey all signs and
instructions. Do not operate product in any area with a
potentially explosive atmosphere, including fueling areas or
areas which contain chemicals or particles such as grain, dust
or metal powders.
High-Consequence Activities. This product is not
intended for use where the failure of the product could lead to
injury, death or severe environmental damage.
Radio Frequency Interference. Product is
designed, tested, and manufactured to comply with
regulations governing radio frequency emissions. Such
emissions from the product can negatively affect the operation
of other electronic equipment, causing them to malfunction.
Model Number:
GB20, GB30, GB40, GB70 or GB150
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.