Data Sheet

The NOCO Company
30339 Diamond Parkway, #102
Glenwillow, OH 44139 | USA
1.800.456.6626
no.co
Input Voltage AC:
Working Voltage AC:
110-120 VAC, 50-60Hz
85-130 VAC, 50-60Hz
85% Approx.
Power:
132W Max
Low-Voltage Detection:
Back Current Drain: <5mA
Charger Type:
8 Step, Smart Charger
Type of Batteries:
12V & 24V
Battery Chemistries:
Wet, Gel, MF, CA, EFB, AGM, LIB
Battery Capacity:
Up To 230Ah (12V),Up To 115Ah
Dimensions (LxWxH):
Weight:
Technical Specifications
Cooling: Natural Convection
Efficiency:
Ambient Temperature:
Housing Protection: IP65
(24V), Maintains All Battery Sizes
2V (12V), 14V (24V)
Charging Modes
Standby
No Power
In standby mode, the charger is not charging or providing any
power to the battery. Energy Save is activated during this
mode, drawing microscopic power from the electrical outlet.
When selected, an orange LED will illuminate.
14.5V | 7.2A | Up To 230Ah Batteries
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded,
Maintenance-Free and Calcium batteries. When selected, a
white LED will illuminate.
12V
NORM
14.8V | 7.2A | Up To 230Ah Batteries
For charging 12-volt batteries in cold temperatures below 50ºF
(10ºC) or AGM batteries. When selected, a blue LED will
illuminate.
24V
NORM
29V | 3.6A | Up To 115Ah Batteries
For charging 24-volt, Wet Cell, Gel Cell, Enhanced Flooded,
Maintenance-Free and Calcium batteries. When selected, a
white LED will illuminate.
29.6V | 3.6A | Up To 115Ah Batteries
For charging 24-volt batteries in cold temperatures below 50ºF
(10ºC) or AGM batteries. When selected, a blue LED will
illuminate.
12V
COLD/
AGM
24V
COLD/
AGM
14.2V | 7.2A | Up To 230Ah Batteries
For charging 12-volt lithium-ion batteries, including lithium iron
phosphate. When selected, a blue LED will illuminate.
12V
LITHIUM
15.5V | 7.2A | Up To 230Ah Batteries
For charging 12-volt advanced AGM batties, which requires a
higher than normal charging voltage. When selected, a blue
LED will illuminate.
12V
AGM+
Press & Hold
Press & Hold
13.6V
SUPPLY
13.6V | 5A | Max 6A
Converts to a DC power supply for powering any 12VDC device,
like a tire inflator, oil changer, or as a memory retainer when
replacing a battery. When selected, a red LED will illuminate.
Press & Hold
12V
REPAIR
16.5V | 1.5A | Any Capacity
An advanced battery recovery mode for repairing and storing old
damaged, stratified, or sulfated batteries. When selected, a red
LED will illuminate and flash.
Press & Hold
Mode Explanation
Charging Steps
• G7200 Smart Charger
• Battery Clamp Connectors w/ Integrated Eyelets
• User Guide and Information Guide & Warranty
What’s In The Box
Retail Packaging:
Dimensions: 12.60”x3.94”x4.49”
(320 x 100 x 114mm)
Weight: 2.57lbs (1.17kg)
UPC: 0-46221-10034-1
Inner Carton:
Dimensions: 12.95”x4.29”x4.96”
(329 x 109 x 126mm)
0°C to +40°C, 32°F to +104°F
1.73 Pounds (0.78 kg)
(cont’d.) Weight: 2.89lbs (1.31kg)
Master Carton:
Dimensions: 22.52”x13.58”x10.79”
(572 x 345 x 274mm)
Weight: 30.60lbs (13.88kg)
Quantity: 10
UCC: 10046221100348
Units Per Pallet: 300 Units
8.8 x 3.7 x 2.3 in (224 x 94 x 58mm)
2.3in
(58mm)
3.7in
(94mm)
11in
(279mm)
8.8in
(224mm)
0.2in
(4.1mm)
0.1in
(2mm)
AC Cable: 75 in (190.5cm)
DC Cable: 56 in (142.24cm)