Owner's Manual

Understanding Advanced Diagnostics.
Advanced Diagnostics is used when displaying Error
Conditions. It will display a series
of blink sequences
that help you identify the cause
of the error and potential
solutions.
All Error Conditions are displayed with the Error LED
and Standby LED flashing back and forth. The number
of flashes between each pulse denotes a potential Error
Condition (except reverse polarity and low-voltage battery).
r -...
Error
Reason/So~ution
Single
Battery will not hold a charge.
Flash
Have battery checked by a
professional.
Double
Possible battery short.
Flash
Have battery checked by a
professional.
Triple
Battery voltage is too high for
the selected charge mode.
Flash
Check the battery and charge
mode.
Error LED
Reverse polarity. Reverse the
Solid Red
battery connections.
Standby
Battery voltage is too low for
charge to detect or charger
Solid Orange
is in supply. Jumpstart the
battery
to raise the battery
voltage.
.J