Owner's Manual

Mode
6V
NORM
Press & Hold
12V
LITHIUM
Press & Hold
12V
REPAIR
Press &Hold
Explanation
For charging 6-volt Wet Cell, Gel Cell,
Enhanced Flooded, Maintenance-Free
and Calcium batteries. When selected, a
white LED will illuminate.
For charging
12 -volt lithium-i on batteries,
including lithium iron phosphate. When
selected, a blue LED will illuminate.
An advanced battery recovery
mode
for repairing and storing, old, idle,
damaged, stratified
or sulfated
batteries. When selected, a red LED will
illuminate and flash
Using 6V NORM. [Press & Hold]
6V NORM charge mode is designed for 6-volt lead-acid
batteries
only, like Wet Cell, Gel Cell, Enhanced Flooded,
Maintenance-Free and Calcium batteries. Consult the
battery manufacturer before using this mode.
CAUTION. THIS MODE
IS FOR 6-VOLT LEAD-ACID
BATTERIES
ONLY.
Using 12V Lithium. [Press & Hold]
12V Lithium charge mode is designed for 12-volt lithium-ion
batteries only, including lithium iron phosphate.
CAUTION. USE THIS MODE WITH CARE. THIS MODE
IS FOR 12-VOLT LITHIUM BATIERIES ONLY. LITHIUM-
ION BATTERIES ARE MADE
AND CONSTRUCTED
IN DIFFERENT WAYS AND SOME MAY OR MAY NOT
CONTAIN A BATTERY MANAGEMENT SYSTEM (BMS).
CONSULT THE LITHIUM BATTERY MANUFACTURER
BEFORE CHARGING AND
ASK FOR RECOMMENDED
CHARGING RATES AND VOLTAGES. SOME LITHIUM-ION