Material Safety Data Sheet
GB20 Safety Data Sheet
Page 2 of 6
no.co
Section 3 Composition/information on ingredients.
Section 4 First aid measures.
General advice:
Ingestion:
Inhalation:
Eye Contact:
Skin Exposure:
First aid is only applicable in case of a cell rupture. Cell rupture can only occur if product
is misused, mechanically, thermally, or electrically abused to the point of compromising
the enclosure. Contact with internal components may cause allergic skin sensitization
(rash) and irritate eyes, nose, throat, and respiratory system. Cobalt and Cobalt
compounds are considered possible human carcinogens.
Ingestion of battery contents if battery is compromised due to incorrect use or damaged
may cause mouth, throat, and intestinal burns. Seek immediate medical attention. Do
not induce vomiting unless directed to do so by medical personnel.
Inhalation of vapors or fumes released due to heat, damage, or incorrect use, may cause
respiratory irritation. If irritation of nose or throat develops, move away from source of
exposure and into fresh air. Seek immediate medical attention.
For direct contact of chemicals in the battery, flush the affected eye(s) with gentle stream
of clean water for at least 15 minutes, if irritation persists; seek medical attention.
Contact with the internal battery materials can cause burns and skin irritation. If contact
should occur, immediately flush with plenty of water. Cleanse affected area(s) thoroughly
by washing with mild soap and water and, if necessary, a waterless skin cleaner. If
irritation or redness develops and persists, seek medical attention.
Chemical Name Molecular Formula CAS Number Concentration %
Lithium Cobalt Oxide LiCoO
2
12190-79-3 31.5
PVDF (Polyvinylidene Fluoride) (C2H2F2)
n
24937-79-9 2.0
Aluminum Al 7429-90-5 8.2
Graphite C 7782-42-5 16.0
Styrene-Butadiene Rubber C
12
H
14
9003-55-8 0.4
Carboxymethyl cellulose C
8
H
16
O
8
9000-11-7 0.3
Copper Cu 7440-50-8 17.1
Lithium Hexafluorophosphate LiPF
6
21324-40-3 15.5
Polyethylene (C2H4)
n
9002-88-4 8.0
Ethylene-Propylene-Diene
Monomer (EPDM)
24937-16-4 1.0
Exposure to hazardous ingredients is not anticipated under normal product use. Risk of exposure occurs only if the product is
mechanically, thermally, or electrically abused to the point of compromising the enclosure.