NCU2R RECEIVER SETUP
Contents: Important information .......................... 1 System setup ....................................... 1 Advanced setup ................................... 2 Contact us ............................................
Important information: The HUB sends radio signals to NCU2R receivers placed in Oslo panel heaters. Each receiver has a unique ID code that enables the HUB to communicate with the correct unit. Only after the HUB has been set up correctly, other system units/receivers can be added. We recommend registering receivers before installing them onto your panel heater.
Advanced setup: If the “Automatic Search” fails, you can also register each receiver manually. Select (+) “Add new > system unit > manual registration”. The ID code is a 12-digit number printed on the receiver. Enter this number into the text boxes on the screen. Press “+” to enter more units at the same time. It is advised to register only one zone at a time. The Energy Control System product range also has the ID code printed as a QR code. Scan the QR code from the app to make this process easier.