Instructions / Assembly

Install the Leg(H) at the bottom of Left Armrest (B) and Right Armrest(C) by placing Plastic Washer(①) on
the threaded stem.
Then insert threaded stem into the threaded mounting postion at the bottom of Left Armrest(B) and Right
Armrest(C).
Repeat the same step to install the remaining three Legs(H).
Tighten by turning the Leg clockwise.
Note: The use of Plastic Washer(①) are OPTIONAL and are especially useful to help alleviate slight
wobbles. Some Legs may need more than one whilst some legs may not need any.
Step 9
Change tilt and lay the Sofa another side onto a flat surface.
Tighten all the Bolts at the end of bottom Left Armrest(B) and Right Armrest(C) by Allen Key(②) as
pictured above.
Tighten the Bolts fully in a sequential manner.
Left Armrest(B)
Right Armrest(C)
Leg(H)
Leg(H)
H
Noble House Home Furnishings LLC Page 9 OF 11