Assembly Instructions Caution: You must read this before you proceed Loveseat Part List Label Description QTY A Loveseat Base 1 B Front Leg 1 C Back Leg 2 Noble House Home Furnishings LLC Picture Page 1 of 5
Hardware Label Picture Description QTY ① Bolt (M8*50mm) 5 ② Allen Wrench 1 ③ Washer 5 ④ Spring Washer 5 ⑤ Gasket 5 Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 of 5
Assembly Steps Overview Loveseat Base (A) Front Leg (B) Back Leg (C) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 3 Loveseat Base (A) Front Leg (B) Attach Front Leg(B) to Loveseat Base(A) using Bolts(①), Spring Washers(④), and Washers(③) with Allen Wrench(②). Tighten the Bolts fully in a sequential manner. Step 4 ⑤ Back Leg (C) Back Leg (C) Loveseat Base(A) Front Leg (B) Install the Back Leg(C) at the bottom of the Chair by placing one Gasket(⑤) on the threaded stem. Then insert threaded stem into the threaded mounting postion at the corner of the Chair. Tighten by turning the Leg clockwise.
Step 5 With help of an adult partner, stand the Loveseat up. Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface.
