Instructions / Assembly

Tilt and lay the Sofa on its Backrest(A) onto a flat surface.
Attach Seat(D) to Left Armrest(B) and Right Armrest(C) using Bolts(①), Spring Washers(⑤), and
Washers(②) with Allen Key(④) as pictured above.
Then, attach Seat(D) to Backrest(A) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen
Key(④).
Tighten the Bolts fully in a sequential manner.
DO NOT fully tighten a Bolt in one go and then move on to the next.
Rather, In a sequential manner, gradually tighten each Bolt until all Bolts are evenly secured.
This methodology will ensure maximum evenness once all Bolts are fully tightened.
Note: If you can not insert the Bolts into position, please back to Step 3 to "push Backrest
downwards".
Step 4
Right Armrest (C)
Seat (D)
Left Armrest (B)
Noble House Home Furnishings LLC Page 8 OF 11