Assembly Instructions Caution: You must read this before you proceed Sofa Noble House Home Furnishings LLC Page 1 OF 11
Part List Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat 1 E Seat Cushion 3 F Sofa Leg 4 G Middle Support Leg 1 Noble House Home Furnishings LLC Page 2 OF 11
Hardware Label Picture Description QTY ① Bolt (M8*70MM) 6 ② Washer 6 ③ Gasket 8 ④ Allen Key 1 ⑤ Spring Washer 6 Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC Page 3 OF 11
Assembly Steps Backrest (A) Left Armrest (B) Right Armrest (C) Seat (D) Seat Cushion (E) Sofa Leg (F) FRONT FACING This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Left Armrest (B) Tapered Connectors on Left Armrest (B) Seat (D) Right Armrest (C) Tapered Connectors on Seat (D) Seat (D) Open the carton and place all the parts on a clean, non-marring surface. With the assistance of your partner, slide the Tapered Connectors on the Seat(D) into the Tapered Connectors on the Left Armrest(B) as shown in the picture. Repeat the same process with the Right Armrest(C).
Step 2 Left Armrest (B) Right Armrest (C) Seat (D) Push the Seat(D) downwards until it is fully slotted and locked into position in the Armrests. Fully locked postion: Check and assess that the base of the Armrests(B&C) and Seat(D) are aligned and level. Assistance from an adult partner is needed for this assembly process.
Step 3 Backrest (A) Tapered Connectors on Backrest Tapered Connectors on Armrest Right Armrest (C) Seat (D) 3.1 Left Armrest (B) 3.2 With the assistance from your partner. 3.1) Lift the Backrest(A) up, make sure the Backrest(A) is vertical and aligned to the Seat and Armrests. Align the Tapered Connectors on the Backrest(A) with those on the Left Armrest(B) and Right Armrest(C). Your adult partner may need to push the Armrests inwards to the Backrest(A) to allow for better alignment.
Step 4 Right Armrest (C) Left Armrest (B) Seat (D) Tilt and lay the Sofa on its Backrest(A) onto a flat surface. Attach Seat(D) to Left Armrest(B) and Right Armrest(C) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen Key(④) as pictured above. Then, attach Seat(D) to Backrest(A) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen Key(④). Tighten the Bolts fully in a sequential manner. DO NOT fully tighten a Bolt in one go and then move on to the next.
Step 5 Use Gaskets (③) to achieve stability Gasket (③) Sofa Leg (F) Middle Support Leg(G) Sofa Leg (F) Install the Sofa Leg(F) at the bottom of the sofa by placing one Gasket(③) on the threaded stem. Then insert threaded stem into the threaded mounting postion at the corner of the Sofa. Tighten by turning the Leg clockwise. Repeat the same step to install the remaining four Legs. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles.
Step 6 Seat Cushion (E) Place the Seat Cushions(E) onto the Sofa. Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 11 OF 11