Assembly Instructions Caution: You must read this before you proceed Sofa Part List Label Picture Description QTY A Seat Base 1 B Backrest 1 C Seat Cushion 3 Noble house Home Furnishings LLC Page 1 OF 13
D Left Back Cushion 1 E Right Back Cushion 1 F Middle Back Cushion 1 G Left Arm 1 H Right Arm 1 I Front Seat Board 1 J Back Seat Board 1 K Wood Leg (with Gasket) 4 Noble house Home Furnishings LLC Page 2 OF 13
Middle Leg (with Gasket) 1 Description QTY ① Gasket 3 ② Allen Key 1 L Hardware Label Picture Assembly Preparation Before Begining Assembly: Noble house Home Furnishings LLC Page 3 OF 13
Assembly Steps Overview Middle Back Cushion (F) Left Back Cushion (D) Right Back Cushion (E) Right Arm (H) Backrest(B) Seat Cushion(C) Front Seat Board(I) Left Arm (G) FRONT FACING Wood Leg (K) This Sofa has multiple parts and may require about 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 C A C B E D I G F H C J Small Bubble Package Take the Seat Base(A), Backrest(B), Seat Cushions(C), Left Back Cushion(D), Right Back Cushion(E), Left Arm(G), Right Arm (H), Front Seat Board(I), Back Seat Board(J) and Small Bubble Package out of the carton and place them on a clean, non-marring surface. Step 2 K L ① ② Small Bubble Package Open the Small Bubble Package to take out the Wood Legs(K), Middle Leg(L), Gaskets(①) and Allen Key(②).
Step 3 K ① G H H G Turn the Left Arm(G) and Right Arm(H) facedown as pictured. Install the Wood Legs(K) at the bottom of the Left Arm(G) and Right Arm(H). Insert threaded stem into the mounting positions at the bottom of Left Arm(G) and Right Arm(H). Tighten by turning the Leg clockwise. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one gasket whilst some Legs may not need any.
Step 4 G G J J ② J G H With assistance from your adult partner, postion the Left Arm(G) and Right Arm(H) as pictured, align the Back Seat Board(J) between both Arms. Then place the hooks on the ends of the Back Seat Board(I) onto the two raised Bolts on the Left Arm(G) and Right Arm(H) and tighten with Allen Key(②). Note: The Bolts on the arms shouldn't be removed but may need to be loosened to fit the hooks.
Step 4 H H I ② I I H G J Repeat the same process from Step 3, to assemble the Front Seat Board(J).
Step 5 L ① L A Install the Middle Leg(L) at the bottom of the Seat Base(A). Insert threaded stem into the mounting position at the bottom of the Seat Base(A), tighten by turning the Leg clockwise. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one gasket whilst some Legs may not need any.
Step 6 G A A H G I I With assistance from your adult partner, hold up the Seat Base(A) and align it to the Sofa Base. Intersect the Mounting Brackets on the Seat Base(A) with those on the Left Arm(G) and Right Arm(H), then push firmly down on the Seat Base(A) until it locks into position.
Step 7 B B H G With assistance from your adult partner, hold up the Backrest(B), while standing behind the Sofa Base. Align the mounting brackets on both sides of the Backrest(B) with those on the Left Arm(G) and Right Arm(H). Then slide Backrest(B) downward to make sure it locks into place as pictured Step 8 C B H A G Put the three Seat Cushions(C) on the Seat Base(A).
Step 9 F E D B Place Left Back Cushion(D), Middle Back Cushion(E) and Right Back Cushion(F) on the Backrest(B). Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
9 f0 Noble house Home Furnishings LLC Page 13 OF 13
