Assembly Instructions Caution: You must read this before you proceed Sofa Noble House Home Furnishings LLC Page 1 OF 11
Parts List Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat 1 E Seat Cushion 2 F Sofa Leg 4 Noble House Home Furnishings LLC Page 2 OF 11
Hardware Label Picture Description QTY ① Bolt (M8*70 MM) 5 ② Washer 5 ③ Gasket 7 ④ Allen Key 1 ⑤ Spring Washer 5 Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC Page 3 OF 11
Assembly Steps Overview Backrest (A) Right Armrest(C) Left Armrest(B) Seat Cushion(E) Seat(D) Sofa Leg(F) FRONT FACING This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Sofa, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Left Armrest (B) Right Armrest (C) Seat (D) Tapered Connectors on Left Armrest (B) Tapered Connectors on Seat (D) Seat (D) Open the carton and place all the parts on a clean, non-marring surface. With the assistance from your partner, slide the Tapered Connectors on the Seat(D) into the Tapered Connectors on the Left Armrest(B) as shown in the picture. Repeat the same process with the Right Armrest(C).
Step 2 Left Armrest (B) Seat (D) Right Armrest (C) Push the Seat(D) downwards until it is fully slotted and locked into position in the Armrests. Fully locked postion: Check that the base of the Armrests(B&C) and Seat(D) are aligned and level.
Step 3 Backrest (A) Tapered Connectors on Backrest Tapered Connectors on Armrest Left Armrest (B) Right Armrest (C) 3.1 Seat (D) 3.2 With the assistance from your adult partner: 3.1) Lift the Backrest(A) up, make sure the Backrest(A) is vertical and aligned to the Seat and Armrests from Step 2. Align the Tapered Connectors on the Backrest(A) with those on the Left Armrest(B) and Right Armrest(C).
Step 4 Left Armrest (B) Right Armrest (C) Seat (D) Tilt and lay the Sofa on its Backrest(A) onto a flat surface. Attach Seat(D) to Backrest(A) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen Key(④) as pictured above. Then, attach Seat(D) to Left Armrest(B) and Right Armrest(C) using Bolts(①), Spring Washers(⑤), and Washers(②) with Allen Key(④). Tighten the Bolts fully in a sequential manner. DO NOT fully tighten a Bolt in one go and then move on to the next.
Step 5 Use Gaskets (③) to achieve stability Gasket (③) Sofa Leg (F) Install the Sofa Legs(F) at the bottom of the Sofa by placing one Gasket(③) on the threaded stem. Then insert threaded stem into the threaded mounting postion at the corner of the Sofa. Tighten by turning the Leg clockwise. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles. Some Legs may need more than one whilst some Legs may not need any.
Step 6 Seat Cushion (E) Place the Seat Cushions(E) onto the Sofa. Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth. Children should not climb or jump on the furniture.
