Caution : You must read this before you proceed LOVESEAT 产品线条图 Noble House Home Furnishings LLC Page 1 OF 9
Part NO.
Label Picture Description QTY ① Bolt (M8*70mm) 6 ② Allen Key 1 ③ Washer 6 ④ Spring Washer 6 ⑤ Gasket 7 Before Beginning Assembly: Noble House Home Furnishings LLC Page 3 OF 9
Overview Sofa Back(A) Sofa Seat(B) Front Leg(C) Back Leg(D) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Sofa Seat(B) Sofa Back(A) Insert the Sofa Seat(B) into Sofa Back(A) as shown above.
Step 3 Sofa Seat(B) Sofa Back(A) Allen Key(②) Bolt(①) Spring Washer(④) Washer(③) Attach Sofa Seat(B) to Sofa Back(A) at the side mounting positions using Bolts(①), Spring Washer(④) and Washer(③) with Allen Key(②).Repeat the same step to install the both sides. Use the Allen Key(②) to fasten all five bolts. Tighten all Bolts fully in a sequential manner.
Step 4 B Gasket(⑤ C Front Leg（C） Sofa Seat(B) Front Leg Sofa Back(A) Back Leg（D） Install the first Front Leg(C) into the base of the Sofa Seat(B) by placing one Gasket(⑤) onto the threaded stem. Then, insert the threaded stem of the Front Leg(C) into the front mounting position of the Sofa Seat(B) and tighten by turning the Leg clockwise until it is completely secure. Repeat this process with the remaining three Legs.
Step 5 Make sure all parts are connected and fully locked into position. Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 9 OF 9
