Instructions / Assembly

Stand the Loveseat up.

Place the Loveseat on a LEVEL SURFACE.

Inspect it and make sure all parts are adequately connected.

Gently and carefully, sit on the Loveseat.

This will help to align all parts at all joints.

Then get off the Loveseat, and carefully place the Loveseat facedown.

Then proceed to tighten all Bolts at all joints in a sequential manner.

If there are still wobbles, loosen the Bolts and execute the same process.

Step 3

Insert one Back Leg(B) into the mounting position of Seat(A) and attach using Bolts(①), Spring

Washers(③) and Washers(④) with Allen Key(⑤).

Do not fully tighten the Bolts.

Repeat the same process to attach the remaining three Legs.

Attention: The Front Legs(C) using the longer Bolts(②).

Test for Stability

Front Leg(C)

Seat(A)

Back Leg(B)

Noble House Home Furnishings LLC Page 5 OF 7