Instructions / Assembly

Step 4
Step 5
Make sure all parts are connected and securely locked into position.
Your Recliner Loveseat is ready for use.
Caution: This Recliner Loveseat can only be used on a flat, level surface.
Disassembly Note:open the flap on the Backrest(A),use a screwdriver(Don not
use fingers) pressing outward on the metal ear on the preattached Metal Bracket
on one side of the Loveseat Base(B),with assistance of you adult partner to keep
the Loveseat Base(B) in place,pull out the Backrest(A) upward at the same
time,repeat the same step for another side.Then the Backrest(A) can be taken
out.
Smooth down the fabric flap on the Backrest(A).
Run your hands down both sides of the flap,from top to bottom,allowing the
velcro tape to adhere to the flap under the seat of the Recliner Loveseat.
Noble house Home Furnishings LLC Page 4 of 7