Assembly Instructions Caution : You must read this before you proceed TABLE CAUTION : This table is NOT a TOY. Keep your child / children at bay during the assembly process.
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Table Top (A) Central Support Ring(C) Table Leg with Pre-attached Levellers (B) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean soft surface. Step 2 Loosely attach the Central Support Ring(C) to Table Legs(B) using washers(①), Spring Washer(②), and Hex Bolts(③), with the Spanner(⑤). At this stage, only loosely tighten the Bolts. Step 3 Repeat step 2, attaching the remaining 3 legs to the Central Support Ring(C) At this stage, only loosely tighten the Bolts.
Step 4 Lay the Table Top(A), top facedown, onto a flat, soft, clean surface. Attach the Table Legs(B) to the Table Top(A) using Washers(①), Spring Washers(②) and Hex Bolt (④) with the Spanner(⑤). At this stage, only loosely tighten the Bolts. Step 5 Adjust height for balance Adjust height for balance Stand the table rightside up. In a sequential manner, proceed to tighten up all screws. Adjust the Legs pre-installed Levellers until the Table is level with the ground. Your table is now ready for use.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
