Instructions / Assembly

Install the first Front Leg(B) into the bottom of the Chair Seat(B) by placing
one Washer Ring(①) onto the threaded stem.
Insert the threaded stem of the Front Leg(C) into the front mounting position
of the Chair Seat(B) then tighten by turning the leg clockwise until the leg is
completely secure.
Repeat this process with the remaining three Legs.
Note: The use of the Washer Rings are OPTIONAL and are especially
useful to help alleviate slight wobbles. Some Legs may need more than
one whilst some Legs may not need any.
Step 2
Step 3
Hind Leg(D)
Front Leg
(C)
Use Washer
Rings(①）to
acheive stablity
Chair Seat(B)
Chair
Seat(B)
Chair
Backrest(A)
Front Legs(C)
Page 4 OF 6