Caution : You must read this before you proceed CHAIR Label Picture Description QTY A Chair Backrest 1 B Chair Seat 1 Page 1 OF 6
C Front Leg 2 D Hind Leg 2 Description QTY Washer Ring 7 Label ① Picture Before Beginning Assembly: Page 2 OF 6
Overview Chair Backrest(A) Chair Seat(B) Front Legs(C) FRONT FACING This CHAIR has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the CHAIR parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Chair Seat(B) Use Washer Rings(①）to acheive stablity Front Leg (C) Front Legs(C) Hind Leg(D) Install the first Front Leg(B) into the bottom of the Chair Seat(B) by placing one Washer Ring(①) onto the threaded stem. Insert the threaded stem of the Front Leg(C) into the front mounting position of the Chair Seat(B) then tighten by turning the leg clockwise until the leg is completely secure. Repeat this process with the remaining three Legs.
Position yourself behind the chair. Place Chair Backrest(A)into theChair Seat(B).While tilting theChair Backrest(A) slightly forward. Then gently pull the Chair Backrest(A) towards you while pushing it down all the way into the Chair Seat (B)slot located to the rear of the Chair Seat(B). (as marked by the arrow above). Step 3 Make sure all parts are connected and locked into position. Turn the Chair right way up. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Page 6 OF 6
