Caution: You must read this before you proceed RIGHT ARMCHAIR Label Picture Description QTY A Right Armrest 1 B Back 1 C Seat 1 D Side Plate 1 E Foot 4 F Seat Cushion 1 G Back Cushion 1 1 OF 6
Label Picture Description QTY ① Allen Key (M6) 1 ② Bolt (M6*40mm) 13 ③ Washer 13 ④ Allen Key (M4) 1 ⑤ Bolt (M6*45mm) 9 ⑥ Washer Ring 9 Before Beginning Assembly: 2 OF 6
Overview Back Cushion (G) Right Armrest (A) Back (B) Seat Cushion (F) Seat (C) FRONT FACING Foot (E) Side plate (D) This Right Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Right Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach Seat(C) between the Right Armrest(A) and Back(B) using Bolt(②) and Washer(③) with Allen Key(①) from position # I to # V as shown above. Do not fully tigthen. Step 3 Attach Side Plate(D) between the Back(B) and Seat(C) using Bolt(②) and Washer(③) with Allen Key(①) as shown above. Do not fully tigthen.
Attach the Feet(D) to the Chair using Bolts(⑤) and Washer Rings(⑥) with Allen Key(④). Step 5 Turn the Right Armchair right side up. Place the Right Armchair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Right Armchair. This would help to align all the parts at all the joint areas. Then get off the Right Armchair, and in a sequential manner, proceed to tighten all bolts. When tightening the Bolts, tighten sequentially.
OF 6
