Caution: You must read this before you proceed Corner Sofa Label Picture Description QTY A Seat Board 1 B Backrest 1 C Seat Cushion 1 D Back Cushion 2 Noble house Home Furnishings LLC 1 OF 5
Label Picture Description QTY ① Allen Key 1 ② Bolt (M6*40mm) 7 ③ Washer 7 Before Beginning Assembly: Noble house Home Furnishings LLC 2 OF 5
Backrest (B) Back Cushion (D) Seat Cushion (C) Seat Board (A) FRONT FACING This Corner Sofa has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Corner Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 adjust height for balance adjust low for balance Then, with the assistance from an adult partner, stand the Corner Sofa upright. Adjust the Pre-installed Levellers until the Corner Sofa is level with the ground. To adjust the Levellers, with the assistance from an adult partner, tilt the Corner Sofa to rest on two feet. Adjust the levellers to the desired height to avoid wobbles. Step 3 Place the Seat Cushion(C) and Back Cushions(D) on the Corner Sofa. Your Corner Sofa is ready for use.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
