Installation Guide

Loosen the 2 bolts in the Backrest(A) around 0.5inches (half an inch) using the Allen Wrench(②).

Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B) and

Right Armrest(C) as shown in the above picture.

Note: Make sure the Tapered Connectors on the Backrest(A) lock into the Tapered Connectors on

the Left Armrest(B) and Right Armrest(C).

Keep the Backrest(A) and the back of the Left Armrest(B), Right Armrest(C) flat.

Assistance from an adult partner is necessary for this assembly process.

During this assembly process - do exercise caution. You may need to use your hand to press

down and or pave away the padded surface to facilitate the 'slip and slide' assembly.

Caution: Ensure that your fingers do not get caught or pinched in the assembly process.

Step 4

Step 5

Left Armrest(B)

Right Armrest(C)

Backrest(A)

②

Keep the Backrest(A) and the

back of the Left Armrest(B) &

Right Armrest(C) flat.

Noble House Home Furnishings LLC Page 6 OF 11