Installation Guide

Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B)
and the Right Armrest(C) as shown in the picture.
Note: Make sure the Tapered Connectors on the Backrest(A) lock into the Tapered Connectors on
the Left Armrest(B) and the Right Armrest(C).
Assistance from an adult partner is necessary for this assembly process.
During this assembly process - do exercise caution. You may need to use your hand to press
down and or pave away the padded surface to facilitate the 'slip and slide' assembly.
Caution: Ensure that your fingers do not get caught or pinched in the assembly process.
Tilt and lay the Sofa onto a flat surface.
Tighten the Bolts in the bottom of the Left Armrest(B) and the Right Armrest(C) using the Allen
Wrench(③) as pictured above.
Tighten the Bolts fully in a sequential manner.
Step 5
Left Armrest(B)
Right Armrest(C) Backrest(A)
③
Noble House Home Furnishings LLC Page 7 OF 11