Caution : You must read this before you proceed Please look in the inner box under the seat for hardware pack, armrests and front legs.
Label Picture Description QTY A Back 1 B Seat 1 C Front Leg 2 D Left Armrest 1 E Right Armrest 1 Noble House Home Furnishings LLC Page 2 OF 10
Label Picture Description QTY ① Bolt (M8*76MM) 5 ② Bolt (M8*63MM) 9 ③ Bolt (M8*44MM) 3 ④ Bolt (M6*51MM) 3 ⑤ Spring Washer(M8) 17 ⑥ Washer(M8) 17 ⑦ Spring Washer(M6) 3 ⑧ Allen Wrench(M8) 1 ⑨ Allen Wrench(M6) 1 ⑩ Wood Plug 2 Noble House Home Furnishings LLC Page 3 OF 10
Before Beginning Assembly : Overview Back (A) Left Armrest (D) Right Armrest (E) Seat (B) Front Leg(C) Noble House Home Furnishings LLC FRONT FACING Page 4 OF 10 F
This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 A Left Armrest (D) Seat(B) Front Legs (C) Right Armrest (E) Place the Seat(B) on a clean, non-marring surface with the bottom facing you, as shown in picture above.
Step 3 Seat(B) Back(A) Tighten the other four mounting positions on the Seat(B) with Bolts(②), Spring Washers(⑤) and Washers(⑥) with the Allen Wrench(⑧). Do not fully tighten the Bolts. Step 4 Seat(B) Front Leg (C) Back(A) Attach the two Front Legs(C) to the Seat(B), using Bolts(②)Spring Washers(⑤) and Washers(⑥) with the Allen Wrench(⑧). Do not fully tighten the Bolts.
Step 5 Right Armrest(E) Left Armrest (D) 5.1 Seat (B) Back (A） 5.2 5.1:Attach the wood end of Left Armrest (D) and Right Armrest(E) to the bottom of Seat(B) using Bolts(③) Spring Washers(⑤) and Washers(⑥) with the Allen Wrench(⑧). 5.2:Attach the pad end of Left Armrest (D) and Right Armrest(E) to Back(A) using Bolts(④) Spring Washers(⑦) with the Allen Wrench(⑨) . Do not fully tighten the Bolts.
Step 6 Left Armrest (D) Back (A) Seat (B) Right Armrest (E) Front Leg(C) Test for Stability Stand the Loveseat up. Place the Loveseat on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully, sit on the Loveseat. This will help to align all parts at all joints. Then get off the Loveseat, and carefully place the Loveseat facedown. Then proceed to tighten all Bolts at all joints in a sequential manner.
Step 6 Back (A） Attach Wood Plugs(⑩) into the mounting positions of Loveseat Back(A). Step 7 Your Loveseat is ready for use. This Loveseat can only be used on a flat, level surface.
Care & Maintenance ● Furniture may scratch floors. We recommend using furniture pads to protect your floors. ● Do not put hot items directly on furniture surface. ● Do not clean furniture with harsh cleansers or polish. ● Do not place furniture under direct sunlight. ● Do not place furniture near heating or cooling vents. ● Do not write on furniture without a padded barrier to protect the surface. ● Do not place furniture outside . For indoor use only. ● Not for commercial use.
