Assembly Instructions Caution: You must read this before you proceed SOFA Noble House Home Furnishings LLC Page 1 OF 10
Part List Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat 1 E Left Seat Cushion 1 F Right Seat Cushion 1 G Back Cushion 2 H Iron Leg 4 I Middle Leg 1 Noble House Home Furnishings LLC Page 2 OF 10
Hardware List Label Picture Description QTY ① Plastic Washer 2 ② Bolt(M8*55) 5 ③ Flat Washer Ring 13 ④ Spring Washer Ring 13 ⑤ Bolt(M8*25) 9 ⑥ Allen Wrench 1 Assembly Preparation Before Beginning Assembly: *2 *4 *1 Noble House Home Furnishings LLC *2 *5 *13 *13 *9 *1 Page 3 OF 10
Assembly Steps OVERVIEW Left Armrest(B) Backrest (A) Back Cushion(G) Left Seat Cushion(E) Seat(D) Right Armrest(C) Right Seat Cushion(F) Iron Leg(H) FRONT FACING This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Right Armrest(C) Left Armrest(B) Seat(D) Fabric on the side do not stuck inside. Open the carton and place all the parts on a clean, non-marring surface. Attach the Left Armrest(B) and Right Armrest(C) to the Seat(D) as shown above. NOTE:The fabric on the side of Seat(D) do not stuck inside.
Step 3 Right Armrest(C) Left Armrest(B) Iron Leg(H) ③ ④ ⑤ ⑥ Install the Iron Legs(H) to Left Armrest(B) using Bolts(⑤),Spring Washer Rings(④),Flat Washer Rings(③) with the Allen Wrench(⑥), turning clockwise until tight. Repeat the same process with the Right Armrest(C).
Install the Middle Leg(I) to the Seat(D) using a Plastic Washer(①) turning clockwise until tight. Step 5 Left Armrest(B) Right Armrest(C) Seat(D) Stick the fabric to the Right Armrest Stick the fabric of the Seat(D) to the Right Armrest(C) and Left Armrest(B) as shown above.
Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B) as shown in the picture. Repeat the same process with the Right Armrest(C). Note: Make sure the Tapered Connectors on the Backrest(A) lock into the Tapered Connectors on the Left Armrest(B) and the Right Armrest(C). Assistance from an adult partner is necessary for this assembly process. During this assembly process - do exercise caution.
Place the Back Cushions(G) on the sofa. Step 9 Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 10 OF 10
