Instructions / Assembly

Step 3
Note : Whilst attaching this Front Rail(E), the sliding action needs to be synchronised with your partner.
With the assistance of your partner, slide the hook at the ends of Front Rail(E) into the bolts on the Left
Armrest(B) and Right Armrest(C), as shown above.
Then, proceed to TIGHT-LOCK the bolts on Front Rail(E).
Allow for 0.2 inches space.
DO NOT over tighten.
Next, move and stand into seat box area of the sofa.
As pictured above, in the inner face of Backrest(A),both Armest and towards the base of the arm, you will
see eight( 8 ) pcs of pre-attached botls.
Using the Allen Wrench(②), loosen these bolts to about half an inch.
Left Armrest(B)
Right Armrest(C)
Front Rail(E)
Noble House Home Furnishings LLC Page 6 OF 11