Instructions / Assembly

Step 1
Step 2
Open the carton and place all the parts on a clean, non-marring surface.
Caution :
1. ) You may need to use one hand to depress the foam cushion in the Backrest panel to ease the
installation into the armrests.
2. ) Be careful to NOT get your fingers get caught or pinched at the Tapered Connectors area.
3. ) A well timed synchronised timing and speed will result in an easy assembly of the Backrest Panel into the
Armrests.
Here, in Step 1 assembly, would require assistance from your adult partner.
First, make sure the pre-attached Tapered Connectors in the arms are both facing inwards.
Then, place both the Left and Right Armrest( A & B ) apart to the width space of the Backrest Panel(A).
Next position your partner and yourself, standing at the back, to the edge of the Backrest Panel(A ).
Together, lift the Backrest Panel(A ) till the pre-attached Tapered Connectors in the Backrest Panel is above
the Tapered Connectors of the Armrests.
In synchronised timing, gently and slowly, slide the Backrest Panel Connectors into the Connectors of the
Armrests.
Backrest(A)
Left Armrest(B)
Right Armrest(C)
Left Armrest(B)
Right Armrest(C)
Backrest(A)
②
Keep the Backrest(A) and
the back of the Left
Armrest(B), Right
Armrest(C) flat.
Noble House Home Furnishings LLC Page 5 OF 11