Caution: ●You must read this before you proceed.
Label ① Picture Description QTY BOLT (25MM X 8MM) 5 WASHER (18MM Diameter) 5 SPANNER 1 ② ③ Before Beginning Assembly: NOBLE HOUSE HOME FURNISHINGS LLC PAGE 2 OF 6 Page 2 OF 6
Overview This Console Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Console parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack all the parts and place them on a non - marring surface.
Step 2 A ② ① ① B Place the Base (B) onto a clean, ① soft surface to ②avoid any scratches or damages to the product as shown above. Place the Top (A) on Base (B) match the holes with the Bolt with Washer fixed in top. Step 3 A ③ B ① ③ Now Fix the Bolt in Bolt which is already fixed in Top. and tighten all 4 Bolts with the help of Spanner .
Step 4 Place the Console on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. CAUTION 1: When tightening these Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then towards the next one.This would cause the frame to warp. If there is still wobbles, loosen the Bolts and execute this same process. WARNING!! IF Console IS NOT STABLE , IT COULD LEAD TO DAMAGING THE PRODUCT. Ensure all Bolts are fully locked into position. The Console is ready to be used.
Care & Maintenance ● Prolonged exposure to rain may cause rusting which can stain floors. ● Do not put hot items directly on furniture surface. ● Do not clean furniture with harsh cleansers or polish. ● To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended. ● Children should not climb or jump on the furniture. ● Do not write on furniture without a padded barrier to protect the surface.
