Instructions / Assembly

4.1) Insert the Rails(I) into the oval mounting Position of Underframe Piece(H) as shown above picture.
Note: Notice the direction label on the Rails or the location of the mounting Positions on the Rails
(on the bottom side, the mounting Position is positioned in the middle of the edges of the rail, and
on the inner side, the mounting Positions are near the inner edges of the rail)
4.2) Then attach the other Underframe Piece(H) to the Step 4.1 semi-assembled parts as shown in the
picture above.
4.3) Put the assembeld frame facedown on a clean, non-marring surface(with the four legs facing
upwards).
Screw in Screws(⑧) with Screwdriver(⑨) as pictured on the bottom side.
Turn over the assembled frame, screwing in Screws(⑧) with Screwdriver(⑨) as pictured on the upper
side.
Note: Before screwing, make sure the Rails(I) are inserted in the Underframe Piece(H) entirely.
Step 4
4.1
I
4.2
4.3
⑧
⑨
I
H
H
I
I
H
I
I
H
H
H
I
I
I
I
H
H
⑨
⑧
Underframe Piece(H)
Rail(I)
Inner side
Bottom side
Bottom side
Inner side
Noble House Home Furnishings LLC Page 9 OF 13