Instructions / Assembly
Place the Seat Cushion(E) and the Back Cushions(D) onto the Seat Panel(B).
Then EXERT pressure, floorwards onto the Loveseat with both hands.
This pressure will help the Loveseat reach full alignment at all joints.
In a sequential manner, gradually tighten Bolts at all joints until evenly secured.
Inspect the Loveseat and make sure all parts are adequately connected.
Your Loveseat is ready for use.
This Loveseat can only be used on a flat, level surface.
Step 6
Note: This is optional step in case we want to connect all chairs in a set
together and should be done before placing cushion.
With assistance from your adult partners, place the Chairs facedown and
connect the pre-attached clips to connect the Chairs together.
Noble House Home Furnishings LLC 7 of 8