Assembly Instructions Caution: You must read this before you proceed Please look in the First Support Leg for hardware packs. Sun Lounger Caution: This Sun Lounger is NOT a TOY Keep your child/ children at bay during the assembly process. Whenever lifting or moving the Sun Lounger and to prevent damage to the Sun Lounger, two adults may be needed to execute these actions.
Part List Label Picture Description QTY A Right Foldable Seat Panel 1 B Left Foldable Seat Panel 1 C Upper Seat Bar 1 D Lower Seat Bar 1 E First Leg 2 F Second Leg 2 G First Support Leg 2 Noble House Home Furnishings LLC Page 2 of 22
H Second Support Leg 2 I Second Leg Bar 2 J First Leg Bar 2 K Long Top Bar 2 L Short Top Bar 2 Noble House Home Furnishings LLC Page 3 of 22
M Cushion 1 N Curtain 2 Description QTY ① Bolt (M6x30mm) 15 ② Bolt (M6x45mm) 5 ③ Bolt (M6x70mm) 3 ④ Sleeve Nut (M6x15mm) 5 ⑤ Screw (M6x50mm) 9 ⑥ Screw (M6x65mm) 9 ⑦ Screw (M6x80mm) 9 ⑧ Screw (M6x100mm) 5 ⑨ Allen Wrench 2 Hardware Label Picture Noble House Home Furnishings LLC Page 4 of 22
Assembly Preparation Before Beginning Assembly: x9 x15 x9 x5 x9 x3 x5 x5 x2 Noble House Home Furnishings LLC Page 5 of 22
Assembly Steps Overview Short Top Bar (L) Long Top Bar (K) Long Top Bar (K) Curtains (N) First Leg Bar (J) First Leg Bar (J) Cushion (M) Second Leg Bar (I) Second Leg (F) Upper Seat Bar (C) Right Foldable Seat Panel (A) First Leg (E) Left Foldable Seat Panel (B) First Leg (E) First Support Leg (G) Second Leg (F) Second Support Leg (H) Lower Seat Bar (D) Second Leg Bar (I) FRONT FACING This Sun Lounger has multiple parts and may require up to 70 minutes to assemble.
Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 2 6 This side, with the "Bottom" word, will face up to the sky 9 A 9 D C B Place the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) face down onto a clean, non-marring surface. Attach the Upper Seat Bar (C) and the Lower Seat Bar (D) to the Right Foldable Seat Panel (A) and Left Foldable Seat Panel (B) by using the Bolts (②), Screws (⑥) and the Allen Wrench (⑨) as shown above.
Step 3 1 1 1 1 9 9 9 9 E F F E Attach the First Legs (E), and the Second Legs (F) to the assembled part in step 2 with the Bolts (①) and the Allen Wrench (⑨) as shown above.
Step 4 9 4 1 9 G 9 4 H 4.1 3 9 4.2 4.1. Attach the First Support Leg (G) to the assembled part in Step 3 by using the Bolts (③), Sleeve Nuts (④) and the Allen Wrench (⑨) as shown above. 4.2. Attach the Second Support Leg (H) to the assembled part in Step 3 by using the Bolts (①), Sleeve Nuts (④) and the Allen Wrench (⑨) as shown above.
Function 1: Sun Lounger without curtain 5.2 M 5.1 Adjust Pre-installed Levellers height for balance 5.1. With assistance from your adult partners, flip up the assembled part in Step 4 and lift the headrest part of it to the desired position as shown above. 5.2. Put the Cushion (M) onto the Sun Lounger, then tie all the strings of the Cushion (M) to the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) as shown above. Place the Sun Lounger on a LEVEL SURFACE.
Function 2: Sun Lounger with Curtain 6.1 6 9 6.2 6.1. Untie all the strings of the Cushion (M) from the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B), then remove the Cushion (M) out of the Sun Lounger as shown above. 6.2. Remove the Screw (⑥) at the upper hole of the Upper Seat Bar (C) and the Lower Seat Bar (D) by using the Allen Wrench (⑨) as shown above.
Step 7 J I I J 8 9 9 7 With assistance from your adult partners, lower the headrest part of the assembled part in Step 7.
Step 8 L 9 K 9 L ⑤ ⑤ By taking the Step Ladders or the A-frame Ladders as well as with the assistance from your adult partner, attach the Long Top Bar (K) and the Short Top Bar (L) to the assembled part in Step 7 by using the Screws (⑤) and the Allen Wrench (⑨) as shown above Do not fully tighten the Screws.
Step 9 9.2 9.1 M 9.1. With assistance from your adult partners, lift the headrest part of the Assembled part in Step 8 to the desired position as shown above. 9.2. Put the Cushion (M) onto the Sun Lounger, then tie all the strings of the Cushion (M) to the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) as shown above.
Step 10 N Adjust Pre-installed Levellers height for By taking a Step Ladder or an A-frame Ladder as well as with the assistance from your adult partner, put the two curtains (N) onto the Sun Lounger. Tie all the strings of the Curtain (N) as shown above. Place the Sun Lounger on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit onto the Sun Lounger. This will help align all the parts at all joint areas.
Removing the curtain for using as a Sun Lounger without Curtain (Function 1) Step 11 By taking a Step Ladder or an A-frame Ladder as well as with assistance from your adult partner, untie all the strings of the Curtain (N) and take the Curtain (N) off of the Sun Lounger as shown above.
Step 12 With assistance from your adult partners, lower the headrest part of the Sun Lounger, then untie all the strings of the Cushion (M) from the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) before you take the Cushion (M) off of the Sun Lounger as shown above.
Step 14 J I I J 8 7 9 9 With assistance from your adult partners, take the Second Leg Bars (I) and the First Leg Bars (J) out of the assembled part in Step 13 by using the Allen Wrench (⑨) to remove the Screws (⑧) and Screws (⑦) as shown above Noble House Home Furnishings LLC Page 19 of 22
Step 15 15.2 6 9 15.1 15.1. Insert the Screws (⑥) into the upper holes at the 4 corners of the Upper Seat Bar (C) and the Lower Seat Bar (D) in the assembled part in Step 14 by using the Allen Wrench (⑨) as shown above. 15.2. With assistance from your adult partner, lift the headrest part of to the desired position as shown above.
Step 16 M Adjust Pre-installed Levellers height for balance Put the Cushion (M) onto the assembled part in Step 15, then tie all the strings of the Cushion (M) to the Right Foldable Seat Panel (A), and the Left Foldable Seat Panel (B) as shown above. Place the Sun Lounger on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit onto the Sun Lounger. This will help align all the parts at all joint areas.
Noble House Home Furnishings LLC Page 22 of 22
